Mud Pumps for Core Drilling
Mud pumps for core drilling rigs: single-cylinder, duplex and triplex pumps from 120 to 250 L/min, pressures to 10 MPa, matched to the rig and hole size.
Flow
32 - 250 L/min
Pressure
up to 10 MPa
Models
7
Models in This Range
Mud pumps for core drilling rigs: single-cylinder, duplex and triplex pumps from 120 to 250 L/min, pressures to 10 MPa, matched to the rig and hole size.
BW-250
15 kW three-cylinder reciprocating pump: 250 L/min at 2.5 MPa down to 52 L/min at 6.0 MPa in four steps. The standard flush pump f
BW-160
Single-cylinder double-acting flush pump: 160 L/min at 1.3 MPa with a switchable high/low pump head and top-rod clutch — the stand
BW-160 (flat head)
Flat-head BW-160 variant with top-rod clutch: the same 160 L/min at 1.3 MPa in a 120 kg package for straight flushing work.
BW-160-3
Three-cylinder version of the BW-160: an even flow curve with far less pressure ripple for sensitive flushing jobs, two flow/press
BW-150
Eight-step flow and pressure in one pump: 32 – 150 L/min at 1.8 – 7.0 MPa, covering coring, grouting and small water-well flushing
BW-160/10
High-pressure triplex pump: 160 L/min at 2.5 MPa down to 44 L/min at 10 MPa in four steps, for deep holes and long flush lines.
BW-200
Double-acting duplex pump with two liner options: 200 L/min at 4.0 MPa or 125 L/min at 6.0 MPa, 11 kW drive, 300 kg skid.
Not Sure Which Model Fits?
Send the depth and ground condition — we will shortlist within the range.